+201028568814
Dräger PARAT 5520 Soft Pack Fire and Smoke Escape Hood
Designed to provide protection from toxic gases, vapours and particles produced during a fire, the Dräger Parat 5520 is a full head fire escape hood supplied in a handy IP5 rated soft pack for protection against dust. Ideal for use in an emergency, the Dräger Parat hood is ready for use in 3 easy steps and provides respiratory and eye protection for a minimum of 15 minutes. The fire escape hood is universally sized to accommodate a wide range of users and is fitted with an 8 year lifespan high performance filter, which can then be replaced to give the Dräger Parat hood a 16 year total service life.
- Full head fire escape hood for both respiratory and eye protection
- Protects against fire-related toxic gases and particles including carbon monoxide
- Provides protection for a minimum of 15 minutes
- Also tested for use against Hydrogen Sulphide (H2S)
- EN 403:2004 approved: standard for fire escape hoods
- 8 year maintenance free lifespan: filter can then be replaced for another 8 year service life
- Universally sized: features a flexible neck seal and specially designed inner half mask
- Automatically adjusting internal head harness means no additional hood tightening is required
- Designed for user comfort and a secure fit in the event of an emergency
- Large visor with special anti-fog coating for clear vision
- Supplied in an IP5 protected soft pack that protects from dust
- Manufactured in Germany
- Ready for use in only 3 steps
- Bright colour hood ensures high visibility in an emergency
- Size Guide
Size Guide
FEET LENTH EU SIZE US SIZE UK SIZE 26 CM 40 7.5 7 26.5 CM 41 8 7.5 27 CM 42 9 8 28 CM 43 10 9 28.5 CM 44 10.5 10 29.5 CM 45 11.5 10.5 30 CM 46 12 11 31 CM 47 13 12 All measurements are in CM
and may vary a half CM in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & Return
Delivery
We ship to all Governorates of Egypt. During sale periods and promotions the delivery time may be longer than normal.Return
AlQadem will accept exchanges and returns of unworn and unwashed garments within 30 days of the date of purchase (14 days during the sales period), on presentation of the original till receipt at any store where the corresponding collection is available within the country of purchase. Your return will usually be processed within a week to a week and a half. We’ll send you a Return Notification email to notify you once the return has been completed. Please allow 1-3 business days for refunds to be received to the original form of payment once the return has been processed.Help
Give us a shout if you have any other questions and/or concerns. Email: info@alqadem.com Phone: +2 010 2856 8814 - Ask a Question
Dräger PARAT 5520 Soft Pack Fire and Smoke Escape Hood
Ask a Question
The administrator will get the request a call back
include this product information in the Dashboard Dräger PARAT 5520 Soft Pack Fire and Smoke Escape Hood
Request a Call Back
The administrator can manager
the message with this product information in the Dashboard
Dimensions (LxWxH) : 215 x 155 x 105 mm
Size : 660 g
Escape Time : Minimum 15 mins
Service Life : 16 years (provided the filter is exchanged after 8 years)
Approvals :according to EN 403:2004, additionally tested for the use
against H2S (at 2500 ppm) in accordance with DIN 58647-7
Weight | 0,66 kg |
---|---|
Dimensions | 21,5 × 15,5 × 10,5 cm |
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Related Products
UltraLight. UltraPerformance. UltraCarbon™. Featuring UltraCarbon™ technology, 100%® frameless Hypercraft® sunglass is lighter, stronger and more dynamic than any performance shield on the market. Feel Nothing. See Everything.
Product details
- The Welding Hood comes with an adjustable headband and flame retardant body suitable for construction.
- Operating temperature: -10 – 65 ° C.
- Foldable design for the face screen
- Tight joint/free positioning
- Convenient view when not in use for a long time
Standard size, molded polycarbonate faceshield helps provide good heat resistance and high impact face protection. Faceshield mounts quickly to any 3M™ Headgear without tools. Features medium green color and aluminum coating.
- Medium green faceshield helps reduce glare and brightness.
- Aluminized coating reflects up to 80% radiant heat.
- Developed for use in metalworking, utilities and many other industries.
- Easy-Change™ Faceshields mount quickly to 3M™ Headgea
The M20 self-contained self-rescuer or escape mask
The M20.2 self-rescuer mask (also known as escape mask or emergency escape breathing device) is the smallest SCSR on the market. Compact, lightweight and ergonomic, it can be comfortably belt-mounted or stored into an airtight wall-mounted bracket (orange). It isolates the user’s lungs from dangerous atmospheres using compressed oxygen that can last up to 32 minutes.
M20 self-rescuer mask operating mode
Oxygen automatically flows once the device is extracted from the bracket. It is then breathed by the user through a mouthpiece from a breathing bag. The air expired through the mouthpiece goes through lithium hydroxide that filters CO2. Cleaned air is then reinjected into the breathing bag and re-oxygenated before being breathed again. Even more efficient than an air purifying respirator, this self-contained self-rescuer provides protection against oxygen deficiency (presence of asphyxiating gas or fumes) and toxic gases (values exceeding air purifying potential) and particles.
M20 self-rescuer mask operating procedure
Donning a Ocenco M20.2 SCSR is incredibly easy: the user just needs to take the device out of the bracket, don the mouthpiece and the nose clip and simply breathe. As for any personal protective equipement, an annual control (visual inspection of the oxygen gauge and the device overall state) should be performed and a specific training (with a training self-rescuer mask) is required.
M20 self-contained self rescuer specifications
- Typical performance duration (operating) : 15-20 min
- Typical performance duration (rest) : 32 min
- Donning time: Less than 10 seconds
- Weight : 0.94kg – 1.4 kg with storage case)
- Dimensions : 18,3 x 16,5 x 7,9cm
- Refurbish after use: NO
- Service life: 15 years
Wastewater treatment training
It is required that any operator who needs to enter confined spaces in the sanitation and wastewater treatment sectors has to wear a self-rescuer mask. The M20 self-contained self-rescuer perfectly responds to this obligation!
This unit is made for people who need to operate in confined spaces or in closed or partially closed areas that were not designed to be permanently occupied.
Description
Personal protective equipment that are used to protect the wearer from airborne particles and from liquid contaminating the face.
An N95/ KN95 respirator is a respiratory protective device designed to achieve a very close facial fit and very efficient filtration of airborne particles.
The ‘N95’/ KN95 designation means that when subjected to careful testing, the respirator blocks at least 95 percent of very small (0.3 micron) test particles. If properly fitted, the filtration capabilities of N95/ KN95 respirators exceed those of face masks.
However, even a properly fitted N95/ KN95 respirator does not completely eliminate the risk of illness or death.
N95/ KN95 respirators are not designed for children or people with facial hair. Because a proper fit cannot be achieved on children and people with facial hair, the N95/ KN95 respirator may not provide full protection.
The 3M™ Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M™ Cool Flow™ Valve helps make breathing easier and can offer cooler and drier comfort for the wearer.
Product information
Manufacturer | BLS |
---|---|
Packaging | 1 piece |
Destination use | Population, Professionals, Trained personnel |
Formulations | No |
Protection type | Filtering Cartridges |
Color | Black |
This mask ensures your safety with excellent respiratory protection against substances such as dust, gas and vapours.
Features:
FACEPIECE
Having a more concave shape offers better duration and lower breathing resistance. The sealing edge has small holes to reduce internal heat and humidity.
NOSE CLIP
Internal, placed between the two layers of fabric to reduce any exposed metal parts to a minimum.
AVAILABLE WITH ADJUSTABLE ELASTICS
Provides a custom fit. The textile fibres allow the skin breathe and don’t rub the hair.
AVAILABLE WITH ACTIVATED CARBON
An activated carbon layer is added respirators to protect from nuisance odours caused by gases and vapours, that are both organic and acidic, and ozone in concentrations below the threshold limit value (TLV).
AVAILABLE WITH SINGLE PACK
It maintains a high level of hygiene.
Description
Safety Barrier Mesh 1m x 50m Plastic Hazard Net
Safety Barrier Mesh is a durable barrier fencing mesh, ideal for cordoning off areas on construction sites, road works and at sporting events. Manufactured in different weights and grades to suit applications.
- deal for cordoning off small or large areas
- Roadside or construction worksites
- Landscape worksites
Features
Firefighters or disaster relief personnel to use a respirator, change a respirator use masks and around the wearer’s face and make the wearer respiratory organs, eyes and facial canister or completely isolated anoxic environment, with the outside world has own supply of compressed air source used by the wearer to breathe clean air, breath directly discharged into the atmosphere, either respiratory process, the pressure inside the mask were greater than the environment pressure.
Product parameters
Category | R5300-6.8 | |
Fill the gas | Air | |
Total weight | 9.9Kg(A ir-Filled) | |
Relevant certification | By China national quality supervision and inspection center of fire-fighting equipment certification | |
Air
Bottle |
Material | Carbon fiber composite materials (carbon fiber winding type) |
Content of the product | 6.8L | |
Rated working pressure | 30MPa | |
Hydrostatic test pressure | 45MPa | |
Neck thread | M18x1.5MM | |
Bursting pressure | 102MPa | |
Cylinder weight | About 3.8kg (except the valve weight) | |
Product standards | Q/KJ015-2002 “all fiber winding cylinder aluminum tank” |
The main purpose
Positive pressure air breathing apparatus (hereinafter referred to as the breathing apparatus), the respirator is a cylinder bearing of compressed air to air breathing and protection device for the human body. It is mainly used for fire fighting, chemical, petroleum, metallurgy, shipbuilding, mining, laboratory, oil depot, warehouse departments such as emergency rescue, disaster relief, etc. For firefighters or disaster relief personnel in the smoke, toxic gas, dust or anoxic environment safely and effectively for fire fighting, emergency rescue, disaster relief and rescue work.
Applicable scope
Positive pressure air breathing apparatus (hereinafter referred to as the breathing apparatus), the respirator is a cylinder bearing of compressed air to air breathing and protection device for the human body. It is mainly used for fire fighting, chemical, petroleum, metallurgy, shipbuilding, mining, laboratory, oil depot, warehouse departments such as emergency rescue, disaster relief, etc. For firefighters or disaster relief personnel in the smoke, toxic gas, dust or anoxic environment safely and effectively for fire fighting, emergency rescue, disaster relief and rescue work.
Product Description
- NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles
- Two-strap design with welded dual point attachment helps provide a secure seal
- Cushioning nose foam
- Lightweight construction promotes greater worker acceptance and may help increase wear time
Categories
- Brand
- Disposable Garments
- Ear & Hearing Defence
- Emergency Eyewash
- Eye & Face Protection
- Firefighter Safety
- Head Protection
- HI - VIS Clothing
- Isolation Tools
- Marking and Barrier
- Measuring Tools
- Protective Clothing
- Protective Gloves
- Respiratory Protection
- Safety Shoes
- valves
- Virus Protection
- Welding Equipment
- working at height Equipment
Reviews
There are no reviews yet.