+201028568814
LOCTITE 401 Instant Adhesive
Brand: Henkel
LOCTITE 401 is a general purpose, fast curing, instant adhesive that is ideal for use on porous substrates.
LOCTITE 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. LOCTITE 401 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.
Universal instant adhesive
Very high strength on close-fitting parts
Perfect for all quick repairs and all types of small emergency repairs.
Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics as well as most plastics)
Technical Information
Application Method : Dispense System, Manual
Applications : Bonding Close Fitting Parts, Repairing
Color : Clear
Cure Type : Moisture Cure
Fixture Time, Steel : 5.0 sec.
Gap Fill : 0.15 mm
Key Characteristics : Fixture: Very Fast Fixture, General Purpose, Strength: High Strength, Viscosity: Low Viscosity
Operating Temperature : -40.0 – 120.0 °C (-40.0 – 250.0 °F )
Physical Form : Liquid
Shear Strength, Mild Steel (grit blasted) : 20.0 N/mm² (2900.0 psi )
Substrates : Elastomer, Metal, Plastic, Porous Surface
Technology : Cyanoacrylate
Viscosity: 100.0 mPa·s (cP)
How to
Step by Step Guide
1. Preparation – Cleaning
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7063/7064/7070) to degrease and clean surfaces prior to applying the adhesive.
2. Preparation – Priming
To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 7239 or LOCTITE® SF 770 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.
3. Preparation – Activation
If cure speed is too slow, use appropriate activator LOCTITE® SF 7458 or LOCTITE® SF 7455 (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.
4. Application
Apply adhesive onto one side/part.
5. Assembly
Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured. Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7458 or LOCTITE® SF 7455. Spray or drop activator onto excess product.
Related Products
1-1/2"Stainless Steel (316) Ball Valve - 1 Piece Standard Port, 1,000 PSI (WOG)
Call for Price
DESCRIPTION
Our Stainless Steel (316) Standard Port Ball Valve, VBS01 line, is ready for action, with a 1,000 PSI rating, pure PTFE seats and seals, and a locking handle for added safety. Works with a wide variety of liquids and gasses.
• SS316 Investment Casting Body
• Working Pressure 1,000 PSI (WOG)
• PTFE seals and seats
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 degree Fahrenheit
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• FxF NPT Threaded ends (ANSI B1.20.1)
• Heavy duty locking handles with blue vinyl insulator
• SS316 Investment Casting Body
• Working Pressure 1,000 PSI (WOG)
• PTFE seals and seats
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 degree Fahrenheit
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• FxF NPT Threaded ends (ANSI B1.20.1)
• Heavy duty locking handles with blue vinyl insulator
Marine Bronze 5K Screw Down Check Globe Valve F-7351
Call for Price
Code Description
751051 Marine Bronze 5K Screw Down Check Globe Valve F-7351, 15mm
751052 Marine Bronze 5K Screw Down Check Globe Valve F-7351, 20mm
751053 Marine Bronze 5K Screw Down Check Globe Valve F-7351, 25mm
751054 Marine Bronze 5K Screw Down Check Globe Valve F-7351, 32mm
751055 Marine Bronze 5K Screw Down Check Globe Valve F-7351, 40mm
3/4 "Stainless Steel (316) Ball Valve - 1 Piece Standard Port, 1,000 PSI (WOG)
Call for Price
DESCRIPTION
Our Stainless Steel (316) Standard Port Ball Valve, VBS01 line, is ready for action, with a 1,000 PSI rating, pure PTFE seats and seals, and a locking handle for added safety. Works with a wide variety of liquids and gasses.
• SS316 Investment Casting Body
• Working Pressure 1,000 PSI (WOG)
• PTFE seals and seats
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 degree Fahrenheit
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• FxF NPT Threaded ends (ANSI B1.20.1)
• Heavy duty locking handles with blue vinyl insulator
Loctite 270
Call for Price
Threadlocking Adhesive – high strength. Permanent locking. Suitable for all metal threaded assemblies.
LOCTITE 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C.
High-strength general threadlocker for maximum efficacy
Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
Proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids
Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces)
Permits disassembly with hand tools
LOCTITE 641
Call for Price
Retaining Compound – medium strength. If disassembly is required. Ideal for parts that need subsequent dismantling.
LOCTITE 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings.
Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings
1/2"Stainless Steel (316) Ball Valve - 1 Piece Standard Port, 1,000 PSI (WOG)
Call for Price
DESCRIPTION
Our Stainless Steel (316) Standard Port Ball Valve, VBS01 line, is ready for action, with a 1,000 PSI rating, pure PTFE seats and seals, and a locking handle for added safety. Works with a wide variety of liquids and gasses.
• SS316 Investment Casting Body
• Working Pressure 1,000 PSI (WOG)
• PTFE seals and seats
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 degree Fahrenheit
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• FxF NPT Threaded ends (ANSI B1.20.1)
• Heavy duty locking handles with blue vinyl insulator
• SS316 Investment Casting Body
• Working Pressure 1,000 PSI (WOG)
• PTFE seals and seats
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 degree Fahrenheit
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• FxF NPT Threaded ends (ANSI B1.20.1)
• Heavy duty locking handles with blue vinyl insulator
JIS F 7304 Bronze 16K angle valves
Call for Price
Pressure:16K
Size:DN15-DN40
Material:Brass,bronze
Type: Globe valve,angle valve
Media: Water,Oil,Steam
1"Stainless Steel (316) Ball Valve - 1 Piece Standard Port, 1,000 PSI (WOG)
Call for Price
DESCRIPTION
Our Stainless Steel (316) Standard Port Ball Valve, VBS01 line, is ready for action, with a 1,000 PSI rating, pure PTFE seats and seals, and a locking handle for added safety. Works with a wide variety of liquids and gasses.
• SS316 Investment Casting Body
• Working Pressure 1,000 PSI (WOG)
• PTFE seals and seats
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 degree Fahrenheit
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• FxF NPT Threaded ends (ANSI B1.20.1)
• Heavy duty locking handles with blue vinyl insulator
• SS316 Investment Casting Body
• Working Pressure 1,000 PSI (WOG)
• PTFE seals and seats
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 degree Fahrenheit
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• FxF NPT Threaded ends (ANSI B1.20.1)
• Heavy duty locking handles with blue vinyl insulator
Marine Bronze 5K Angle Valve -JIS F7302
Call for Price
Product name : Marine Bronze 5K Angle Valve – JIS F7302
Impa Code : 75 01 31 ~ 75 01 37
Size & Connections : DN15 to DN 65 .
Flanges as per JIS B2220 – 5K.
Materials : Bronze Body – Bronze/Brass Bonnet & Stem – Bronze/Brass Disc.
Duty : Air – Inert Gas – Oil – Seawater – Steam – Water .
Pressure Rating : Up to 7 Bar (dependent on application) .
Temperature : Up to 205°C
LOCTITE 222
Call for Price
Features and Benefits
Threadlocking Adhesive – low strength. Easy disassembly. Suitable for all metal threaded assemblies.
LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminum or brass. The product works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids.
Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
Especially suited to small thread sizes
Permits disassembly with hand tools
P1 NSF Reg. No.: 123002
2" Stainless Steel (316) Ball Valve - 1 Piece Standard Port, 1,000 PSI (WOG)
Call for Price
DESCRIPTION
Our Stainless Steel (316) Standard Port Ball Valve, VBS01 line, is ready for action, with a 1,000 PSI rating, pure PTFE seats and seals, and a locking handle for added safety. Works with a wide variety of liquids and gasses.
• SS316 Investment Casting Body
• Working Pressure 1,000 PSI (WOG)
• PTFE seals and seats
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 degree Fahrenheit
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• FxF NPT Threaded ends (ANSI B1.20.1)
• Heavy duty locking handles with blue vinyl insulator
• SS316 Investment Casting Body
• Working Pressure 1,000 PSI (WOG)
• PTFE seals and seats
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 degree Fahrenheit
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• FxF NPT Threaded ends (ANSI B1.20.1)
• Heavy duty locking handles with blue vinyl insulator
BLS Zero Dust Respirator FFP3 with exhalation valve
Call for Price
BLS Zero Dust Respirator with Nano filtration
BLS Zero FFP3 Respirator with preshaped and elastic support that provides an easy and comfortable fit for different face shapes. FFP3 dust mask is equipped with Nano filtration for the very best respiratory protection.
FFP3 Dust Mask that feels like a FFP1 mask
BLS Zero Dust Mask is a revolutionary mask with FFP3 protection. Thanks to the exhalation valve, the exhaled air is concentrated in two zones with a maximum aperture. With these improvements, the breathing resistance decreases considerably.
Dust mask FFP3 with active carbon
BLS Zero Dust Mask is standard equipped with an FFP3 protection class. It can also be supplied with an active carbon layer. This carbon filter protects against annoying odors caused by gases and vapors. Both organic and acid, including ozone (ideal for welding operations).
Dust mask with perfect fit
BLS Zero Respirator guarantees an optimal fit. This mask is provided with a pleasant touch layer that absorbs perspiration and keeps the skin cool and dry.
Product Features BLS Zero Dust Respirator
- Perfect fit
- Pre-formed and elastic support
- Can be used in combination with glasses
- External protective layer that repels dirt, dust and water
- Intermediate layer so sweat is absorbed
- Available with carbon filter
- FFP3 that feels like a FFP1
- Equipped with Nano filtration
Reviews
There are no reviews yet.