+201028568814
fully Stainless Floor Mounted Emergency Shower and Eyewash
The compound eyewash is an emergency rescue product equipped with a spray system and an eyewash system, which is directly installed on the ground for use. When chemical substances are splashed on the clothing or body of the staff, the spray system of the compound eyewash can be used for flushing The rinsing time should be at least 15 minutes; when the harmful substances are splashed on the eyes, face, neck or arms of workers, the eyewash system of the compound eyewash can be used for rinsing, and the rinsing time should be at least 15 minutes. Water flow of sprinkler system: greater than 75.7L/MIN. Eyewash system water flow: greater than 7L/MIN. The compound eye washer is widely used in workplaces where chemical substances exist in industries such as petroleum, chemical, electric power, electronics and ports
General installation steps for compound eyewash
1. According to the eyewash installation drawing provided by the manufacturer, install it step by step.
2. According to the installation hole size of the eye washer base, drill 3–￠10mm holes where the eye washer needs to be installed.
3. Assemble the eye washer step by step according to the eyewash drawing. (Special reminder: the eyewash and the spray should not be on the same plane, and the spray should be rotated 45-90 degrees on the left side of the eyewash).
4. Install the assembled eye washer to the specified position, and fix the eye washer with expansion screws.
5. Connect the water inlet, inlet size: 1-1/4 inches, NPT.
6. Connect the outlet, outlet size: 1-1/4 inches, NPT.
Related Products
Red Wing Style #6705 Men's Slip-On
Call for Price
This lightweight and flexible light-duty slip-on with static-dissipative and non-metallic safety toe protection delivers big on style and comfort. It is broken-in right out of the box to move you smoothly and safely between the office and floor. Underneath, the dual-density BLVD outsole keeps you sure on your feet with best-in-class slip, oil/gas, chemical and heat resistance.
Pompeii 1705 S3 WR
Call for Price
UPPER: Water repellent full grain leather
LINING: AIR PLUS with high degree of evaporation and abrasion resistance
INSOLE: Antibacterial in soft PU with air exchange system
TOE: Composite 200J ANTI-
PERFORATION: HTC insole zero perforation
Red Wing 8249 Men’s 6-Inch Boot
Call for Price
Red Wing 8249 Men’s 6-Inch Boot
This 6-inch boot has steel toe and electrical hazard features. With the brown leather and durable sole, making it the one of the best boots for mining, oil & gas, heavy metal, fabrication, construction & general industrial applications.
DIY Crafts Anti-dust Respirator PVC Dust Face Mask Industrial & Scientific
Call for Price
Product Description
PVC Dust Mask is available with replaceable dust cartridge and elastic head band. Easy and comfortable to wear in yellow and blue colour.
2" Stainless Steel (316) Ball Valve - 1 Piece Standard Port, 1,000 PSI (WOG)
Call for Price
DESCRIPTION
Our Stainless Steel (316) Standard Port Ball Valve, VBS01 line, is ready for action, with a 1,000 PSI rating, pure PTFE seats and seals, and a locking handle for added safety. Works with a wide variety of liquids and gasses.
• SS316 Investment Casting Body
• Working Pressure 1,000 PSI (WOG)
• PTFE seals and seats
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 degree Fahrenheit
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• FxF NPT Threaded ends (ANSI B1.20.1)
• Heavy duty locking handles with blue vinyl insulator
• SS316 Investment Casting Body
• Working Pressure 1,000 PSI (WOG)
• PTFE seals and seats
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 degree Fahrenheit
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• FxF NPT Threaded ends (ANSI B1.20.1)
• Heavy duty locking handles with blue vinyl insulator
MICROGARD 2000 Ts Plus, Yellow coveralls, model 103 – EN 14605: 2005+A1:2009 Type 4
Call for Price
MICROGARD 2000 Ts Plus, Yellow coveralls, model 103
is in conformity with the provisions of Council Directive 89/686/EEC and with the requirements for Category III PPE
meets the minimum requirements specified by product standards;
EN 14605: 2005+A1:2009 Type 4 (Limited life, full body chemical protective clothing with spray tight connections)
EN ISO 13982-1: 2004+A1:2010 Type 5 (Limited life, full body protection against airborne solid particulates)
EN 13034: 2005+A1:2009 Type 6 (Limited life, full body chemical protective clothing against liquids)
EN 1073-2: 2002 (Non-ventilated protective clothing against particulate radioactive contamination) performance classification of TIL Class 2
EN 14126: 2003 Types 4-B, 5-B, 6-B (Limited life, full body protective clothing against infective agents
EN 1149-5: 2008 for electrostatic dissipative protective clothing
DIN 32781: 2010 Protective suits against pesticides
is identical to the PPE which is subject of EC type examination certificate No GB09/78127 issued by SGS UK Ltd, Weston-super-mare, United Kingdom, BS22 6WA
MICROGARD? 2000 is designed to allow water vapour (perspiration) to escape from the suit yet
will withstand saturation of liquid chemicals and filter 100% of particulates down to 0.01 microns
in size*.
With stitched and taped seams, MICROGARD? 2000 Ts PLUS provides an exceptional overall
barrier to low hazard liquid spray and fine particulates.
*EMSL test method
Red Wing Style #8217 Men's StitchMax Oxford
Call for Price
Red Wing Men Stitchmax 8703 Black Lace Up Low Top Round Toe Oxford Shoes Size 8D. Toes are a little scuffed. In overall good shape.
Technologies:
Puncture Resistant, Static Dissipative, Aluminum Toe, Red Wing Leather, CuShin™
4 in stock
3/4 "Stainless Steel (316) Ball Valve - 1 Piece Standard Port, 1,000 PSI (WOG)
Call for Price
DESCRIPTION
Our Stainless Steel (316) Standard Port Ball Valve, VBS01 line, is ready for action, with a 1,000 PSI rating, pure PTFE seats and seals, and a locking handle for added safety. Works with a wide variety of liquids and gasses.
• SS316 Investment Casting Body
• Working Pressure 1,000 PSI (WOG)
• PTFE seals and seats
• Suitable for full range of liquids and gas
• Temperature range: -60 to 450 degree Fahrenheit
• Low operation torque
• 100% individually tested
• Blowout-proof stem
• FxF NPT Threaded ends (ANSI B1.20.1)
• Heavy duty locking handles with blue vinyl insulator
Red Wing 8264 Men’s 9-Inch Pull On Boot
Call for Price
This stylish and durable pull on safety boot is produced with high quality brown leather. On top of that, it also features safety technologies like Puncture Resistant, Steel Toe, Electrical Hazard, SuperSole and Swen Flex. It is your reliable boots at working in harsh environments.
Reviews
There are no reviews yet.